How to Fix Suction Cups that Won’t Stick
Have you ever been woken up in the dead of night only to discover the suction cups on your shower wall gave way and dropped your beauty products? This can cause anyone to freak out and, at the same time, curse the suction cups manufacturer for making suboptimal products.
Why Won’t My Suction Cups Stick?
There are a couple of things that could make your suction cups fall off. These range from poor-quality cups to an incompatible sticking surface. Here are the top three reasons you should be worried about.
Check this too: What to Bring to Someone’s House for the First Time
Quality of the Suction Cups
Admittedly, the quality of suction cups you buy determines the kind of hold you get out of them. For you to be able to stick your suction cups and get a good grip, you first need to ensure you buy high-quality suction cups.
Check this too: Best Thermostatic Shower
The Surface Texture
It is easier to stick suction cups on some surfaces as compared to other surfaces. And to make them stick on harder to stick on surfaces, you will need to employ some tricks to make then adhere to said surfaces.
Surface Cleanliness
If you try to stick the suction cup to a dirty, grimy surface, then chances are it will not stock. The reason being the grease is preventing it from staying in place. As such, you need to clean surfaces before you try to stick suction cups on them.
How to Make Suction Cups Stick to Glass
Rinse the suction cup under warm water to soften it and shake off the excess water. Then press it down on the glass and maintain pressure as you hold it down for at least fifteen seconds. Then gradually ease the pressure until all air bubbles are released. This helps to create a vacuum that enables the suction cups to adhere to the glass.
How to Make Suction Cups Stick to Textured Surfaces
Clean the surface thoroughly as any dirt such as soap scum on bathroom tiles or grease buildup may prevent the suction cup from sticking properly. You can use an alcohol-based cleaner to remove all the dirt.
Then apply a layer of oil or petroleum jelly to the surface. This will create an airtight seal that will help the suction cup stay stuck for longer. You can also buy suction cups for rough surfaces.
Can Suction Cups Stick Forever?
No. They cannot stick forever. The reason being they absorb air over time, which in turn reduces the level of suction gradually. But you can increase the sticking period by using low-pressure oil to fill the void and reduce air entering into the vacuum.
To make suction cup a stick to a dashboard, first, clean the surface, then peel off the wax paper and stick the suction cup. Always let the suction cup sit for at least 24 hours before you start using it. This is to ensure the suction cup has completely adhered to the surface.
Always press down the suction cup in the center for an optimal vacuum creation. To help the suction cup stay in place, press it regularly to push out any air pockets that may have gotten into the vacuum.